Diaphragm Valves Standard 2-Way Bodies Butt Weld End

Standard 2-Way Bodies
The standard 2-way valve body is the basic building block of diaphragm valve technology. CRANE ChemPharma, Saunders• 2-way forged bodies are manufactured from wrought 316U1 A435 stainless steel bar with additional requirement of controlled sulfur per ASME BPE Standard.

The forging process results in a homogeneous surface that helps to eliminate porosity, inclusions, or shrinkage cavities. This surface is an ideal substrate for the high levels of mechanical and electropolished surfaces demanded by the clean processing industries to maintain sterility and optimize cleaning processes. CRANE ChemPharma, Saunders" forged bodies are manufactured to achieve low ferrite levels of less than 0.5% maximum. This reduces the potential for migration of oxides through a high purity water system.

Valve Body Features
1. Cavity-free and self-draining
2. Full traceability to EN 10204 3.1 and ASME BPE
3. Serialized bodies for traceability and ASME BPE bodies are marked in accordance with DT 11-1

Forged Body Features :
1. Hash marks to indicate self drain angle
2. Integral weld and hygienic clamp ends
3. Controlled sulfur, 0.00S-0.017% per ASME BPE Standard
4. Certified to ASTM A-182 and DIN 1A435
5. Full compliance with weld end tangent length as per DT-4.1.1 and with clamp end lay length per DT-4.4.1-1